Your Choice 3/Your Choice Software Collection 3.iso/os2/grfcdemo/demo.@/MESSAGES.DAT

Text File | 1994-04-14 | 18.0 KB | 1,019 lines

******************************************************************** MESSAGES

@M001
@
The allowable choices are:
    c -- convert TKF file to another format
    f -- redirect printer dump to a file
    l -- large, low resolution plot
    L -- large, high resolution plot
    m -- medium sized, low resolution plot
    M -- medium sized, high resolution plot
@

@M002
@    n -- PLAY a new TKF file
@

@M003
@    p -- change printer selections
    q -- quit and close files
    s -- color separation output
    v -- vary PostScript parameters
    w -- shrink picture to fit window
    z -- zoom marked area to fill screen
@

@M004
@    1 thru 9 -- skip n pictures
@

@M005
@
Do you want PostScript Level 2? (Y/N) @

@M006
@    CR -- go on to next plot
    space bar -- replay current plot
Enter choice: @

@M007
@
Do you want the background color suppressed? (Y/N) @

@M008
@
Do you want (1) 4014 or (2) 4105 output? (1/2) @

@M010
@
The choices for a file conversion are:
    0 -- Abort
    1 -- Lotus PIC file
    2 -- Digital Research or Ventura GEM file
    3 -- Hewlett Packard plotter HP-GL file
    4 -- Hewlett Packard plotter HP-GL/2 file
    5 -- Encapsulated PostScript file
    6 -- TIFF bit image file
    7 -- CGM (Computer Graphics Metafile)
    8 -- Agfa SCODL file
    9 -- Tektronix 4105 standard output
Enter choice: @

@M011
@
You need to run EQUIP and put the configuration files in
either the default directory or the directory specified by
the set GPC(286)(WIN)=<path> command in your autoexec.bat file.
@

@M012
@
Enter TKF file name or a carriage return to quit: @

@M013
@
Couldn't open TKF file.
@

@M014
@
Enter your next option: @

@M015
@
The choices for printer/plotter configuration files are:
    1 -- PRINTER1.PRN
    2 -- PRINTER2.PRN
    3 -- PRINTER3.PRN
    4 -- PRINTER4.PRN
Enter choice: @

@M016
@
Print Made.
@

@M017
@
Print time was: @

@M019
@
Allocating printer buffer @

@M020
@
Freeing printer buffer @

@M021
@
Color separation will occur on your next printer dump or file conversion.
@

@M022
@
No printer has been assigned to the printer configuration file which you
have chosen.  Run EQUIP or try a different printer configuration file.
@

@M023
@
Redirect printer dump to a disk file. This file contains commands which
are normally sent directly to the printer or plotter. The file will be
closed after a single frame.
Enter filename: @

@M024
@
EMM error = @

@M025
@
Not enough memory for printer dump.
@

@M026
@
Enter the line width in pixels (1 thru 32): @

@M027
@
The default font is BINARY.FNT


   ( 0) Times - Roman                 (15) Palatino - BoldItalic
   ( 1) Times - Bold                  (16) Bookman - Demi
   ( 2) Times - Italic                (17) Bookman - DemiItalic
   ( 3) Times - BoldItalic            (18) Bookman - Light
   ( 4) Helvetica                     (19) Bookman - LightItalic
   ( 5) Helvetica - Bold              (20) NewCenturySchlbk - Roman
   ( 6) Helvetica - Oblique           (21) NewCenturySchlbk - Bold
   ( 7) Helvetica - BoldOblique       (22) NewCenturySchlbk - Italic
   ( 8) Courier                       (23) NewCenturySchlbk - BoldItalic
   ( 9) Courier - Bold                (24) Helvetica - Narrow - BoldOblique
   (10) Courier - Oblique             (25) Helvetica - Narrow
   (11) Courier - BoldOblique         (26) Helvetica - Narrow - Bold
   (12) Palatino - Roman              (27) Helvetica - Narrow - Oblique
   (13) Palatino - Bold               (28) Symbol
   (14) Palatino - Italic             (29) ZapfDingbats


Enter the number of the desired font OR
press RETURN to keep the default: @

@M028
@
Invalid entry.
@

@M029
@
Type a 'q' to abort all remaining plots.
Any other key to continue with the next plot.
@

@M030
@file conversion complete.
@

@M031
@
Do you want color information put into the PostSript file? (Y/N) @

@M032
@
Do you want a TIFF image put into the file to make it viewable? (Y/N) @

@M033
@
Is the top of your plot on the left, right, or top of the screen?@

@M034
@
Enter l, r, or t: @

@M035
@
Enter the path and name of the output file.@

@M036
@
Use the extension .EPS: @

@M037
@
Use the extension .POS: @

@M038
@
Use the extension .PIC: @

@M039
@
Use the extension .GEM: @

@M040
@
Use the extension .TIF: @

@M041
@
Use the extension .HPG: @

@M042
@
Use the extension CGM.
@

@M043
@
Use the extension SCD.
@

@M044
@
Error opening output file.
@

@M045
@
Error writing output file.
@

@M046
@
Error closing output file.
@

@M047
@
The available TIFF pixel resolutions are:
    1 -- 160 x 120
    2 -- 320 x 240
    3 -- 640 x 480
    4 -- 800 x 600
Select a number between 1 and 4: @

@M048
@
Starting the PostScript conversion...
@

@M049
@
Can't allocate memory for TIFF header
@

@M050
@
Please wait while the file is converted...
@

@M051
@
Do you want an `L' or an `M' dump?@

@M052
@
Enter L or M: @

@M053
@
Print Aborted.
@

@M054
@
Allocating scratch buffer @

@M055
@
Freeing scratch buffer @

@M056
@
Can't allocate memory for scratch buffer @

@M057
@
Use the extension .TEK
@

******************************************************************** WARNINGS

@W001
@
Error closing file.
@

@W002
@
Allocation failed. Insufficient memory.
@

@W003
@
The program has encountered a twisted polygon. Some file formats do not
process twisted polygons correctly. GraphiC attempts to split the polygon
at the crossing point. There was not enough memory to split this panel.
@

@W004
@
In page(), x was chosen too long. Has been shortened.
@

@W005
@
In page(), y was chosen too long. Has been shortened.
@

@W006
@
In area2d(), x-axis too long. Size has been reduced.
@

@W007
@
In area2d(), y-axis too long. Size has been reduced.
@

@W008
@
Can not have upright labels on log axis.
@

@W009
@
Z value was greater than the maximum axis value.
@

@W010
@
Z value was less than the minimum axis value.
@

@W011
@
Can not have right-hand log axis.
@

@W012
@
Max font line width is 21.
@

@W013
@
X value out of range. Has been reduced.
@

@W014
@
Y value out of range. Has been reduced.
@

@W015
@
Window goes off the page. Size has been reduced.
@

@W016
@
Data maximum and minimum values are equal.
Attempted to re-scale.
@

@W017
@
Could not find GPC(286)(WIN) environment variable.
@

@W018
@
Invalid histogram type.
Type set to 0 for outline histogram.
@

@W019
@
Could not capture Ctrl-C interrupt.
@

@W020
@
Could not capture floating point interrupt.
@

@W021
@
Step size cannot be 0. Reset for 5 levels.
@

@W022
@
No memory allocated for the arrays the curson() function uses to store
points.
@

@W023
@
For panel filling, define PANEL in USER.H and rebuild GRAPHIC.LIB.
@

@W024
@
Can't read pointer table.
@

@W025
@
Could not capture abnormal abort interrupt.
@

@W026
@
A string containing a Non-recognized character was passed into the text
drawing routines.
@

@W027
@
Can not plot a 0 length vector.
@

@W028
@
Number of points is 0 in call to curve(). Nothing drawn.
@

@W029
@
Error writing to .TKF file.
@

@W030
@
Error writing to .OFF file.
@

@W031
@
RGB values must be in the range 0 - 63.
@

@W032
@
Too many fonts were requested. Only the first four will be used.
To increase the number of allowed fonts change FNTNUM in FNTPLT.C and
rebuild the GraphiC library.
@

@W033
@
A string passed to putlabel() is too long. The maximum string length is
240 characters.
@

@W034
@
The font selection character used in the call to setspacing() was not
one of the selection characters you loaded. The constant spacing will
set active for the current active font.
@

@W035
@
The requested x-crossing value is too small. The crossing has been shifted
to the left edge of the plot.
@

@W036
@
The requested y-crossing value is too small. The crossing has been shifted
to the bottom of the plot.
@

@W037
@
The requested x-crossing value is too big. The crossing has been shifted
to the left edge of the plot.
@

@W038
@
The requested y-crossing value is too big. The crossing has been shifted
to the bottom of the plot.
@

@W039
@
Axes can not cross at (0,0). (0,0) is beyond the range of the axes.
@

@W040
@
The value of the maxq variable is less than the value of the orig
variable. Reversing the values.
@

@W041
@
The step size is negative. The contour levels must go from lowest to
highest. Making step positive..
@

@W042
@
The input string is too long. The string will be broken up into pieces 200
characters long with each piece printed on a separate line.
@

@W043
@
The amount of page shift you requested would cause part of the page to
be out of bounds. You should reduce either the size of your page or the
the shift amount. The shift for this plot has been adjusted.
@

@W044
@
A call to gpcalloc() or gpcrealloc() without a corresponding call to
gpcfree() occurred in file @

@W045
@
Not enough points were specified in the x or y vector to make a contour
plot. The call was ignored.
@

********************************************************************** ERRORS

@E001
@
Allocation failed. Insufficient memory.
@

@E002
@
Could not open file.
@

@E003
@
Color index must be in the ranges: 0 - 15, 50 - 174, 200 - 447.
@

@E004
@
Device driver could not be loaded.
@

@E005
@
Device driver could not be initialized.
@

@E006
@
Could not configure printer port.
@

@E007
@
Separations are not supported for this conversion.
@

@E008
@
Detected memory that was allocated but not freed. See the file GRAPHIC.ERR
for a list of the offending calls to gpcalloc() and gpcrealloc().
@

@E009
@
Viewpoint too close. Changed to isometric.
@

@E010
@
survis() has incorrect argument. The allowable arguments are "top" or
"bottom".
@

@E011
@
Can't skip, the end of the file was reached before the desired picture.
@

@E012
@
File conversion failed. The output file is invalid.
@

@E013
@
Error reading font height.
@

@E014
@
Error reading character.
@

@E015
@
Error reading font width.
@

@E016
@
Maximum font data length is 500 bytes.
@

@E017
@
Not enough memory for an additional window.
The region specified will not be protected.
@

@E018
@
Error reading stroke table.
@

@E019
@
Error reading descender height.
@

@E020
@
Error reading ascender height.
@

@E021
@
Error reading left extender.
@

@E022
@
Symbol style must be bewteen 0 and 16. Using square.
@

@E023
@
Line style must be between 1 and 9. Using solid line style.
@

@E024
@
You should call simuplot(0) to end simultaneous plotting before calling
endplot().
@

@E025
@
Maximum value for matrix row is zero.
@

@E027
@
Block to be freed or re-allocated not found.
Report to Scientific Endeavors!
@

@E028
@
Invalid context number. The context must be in the range 0 <= c < n:
where c is the context number passed into context() and n is the
number of plots passed into simuplot().
@

@E029
@
Too many panels. Limit is 30.
@

@E030
@
Color separation not supported when outputing TKF commands.
@

@E031
@
Not enough memory to allocate storage for clipping the panel. Panel will
not be drawn.
@

@E032
@
Not enough memory to fill between curves. The curves will be drawn without
panel filling.
@

@E033
@
Range too small relative to size of data. The rounding routine uses
floating point presision and the step size is too small to show with the
size of the data. Either normalize your data or use graf() instead of
scales(). If you continue the program the scaling will not be correct and
your curves will not make sense.
@

@E034
@
Data max. must be greater than data min.
Report this error to Scientific Endeavors.
@

@E035
@
Not enough memory to process this panel.
@

@E036
@
You have requested a panel with multiple pieces. There is not enough
memory available to process the current piece. Other pieces will be
processed if enough memory is available.
@

@E037
@
This call must be made after a call to bgnplot() in order to
retriev the window handles that GraphiC will use to draw to.
@

@E038
@
This call must be made before a call to bgnplot() in order to
set the window handles that GraphiC will use to draw to.
@

@E039
@
GraphiC was unable to load at least one of the requested fonts. Be sure
the font names in the call to font() are correct and that the requested
fonts are in your current directory or a directory specified by the
GPC(286)(WIN) environment variable. Your program can still run but no text
will appear on the plot.
@

@E040
@
Not enough memory to allocate the needed internal arrays to create the
contour plot.
@

@E042
@
Not enough memory to allocate storage space for the contour vectors.
@

@E043
@
Not enough memory for the hidden line horizons. Hidden line removal has
been disabled.
@

@E044
@
Not enough memory for the color horizon. The top and bottom of the surface
will be the same color.
@

@E045
@
Not enough memory to fill contours, contour rings will be drawn without
filling.
@

@E046
@
Not enough memory to interpolate the data, no contours will be drawn.
Reduce the values of nx_data and ny_data.
@

@E047
@
Not enough memory for splineing.
@

@E048
@
Not enough data points. Try a coarser grid.
@

@E049
@
Search failure. Try different number of grid divisions.
@

@E050
@
Can not output fewer points than were input.
@

@E052
@
Not enough memory available to shade the surface. If you choose to
continue a wire mesh surface plot will be drawn.
@

@E053
@
The end of the file was reached before the desired picture was found.
@

@E054
@
Could not allocate arrays to create staircase. A curve will be drawn.
@

@E055
@
Open contours were found during a shaded contour plot. Since closed contours
are required, the contour plot will be completed without shading.
@

@E056
@
Not enough memory to allocate the needed internal arrays to create
the 3-D surface.
@

@E057
@
Not enough memory to allocate cross-correlation arrays
@

@E058
@
Not enough memory to interpolate the data, surface will not be drawn.
Reduce the values of nx and ny.
@

@E059
@
Not enough memory available to load one or more of the requested fonts.
Your program can still run but text that uses the font(s) that could not
be loaded will either not appear, or appear in a different font.
@

@E060
@
At least one z value is larger than the maximum z value represented by the
Z-Axis. Since the color bands are calculated from z-min to z-max there is
no specified color for any part of the surface higher than z-max. The
affected patch(s) will be left out. In order to prevent this problem from
occuring, make sure the range of the Z-Axis is >= the range of the data.
@

@E061
@
Memory Guard byte trashed using TESTMEM.
@

@E062
@
Test pattern trashed using TESTMEM.
@

@E063
@
Function getrtq() in CNTPLT.C called with invalid side.
Report this error to Scientific Endeavors.
@

@E064
@
GpiCreateBitmap returned an error.
@

@E065
@
GpiSetBitmap returned an error.
@
**************************************************************** FATAL ERRORS

@F005
@
Numbers on a log scale must be positive!
@

@F009
@
Allocation failed. Insufficient memory.
@

******************************************************************** TT Warnings

@t003
@
Graphic/PST could not allocate memory to draw a character.
The plot can continue, but this TrueType character will
not appear on the plot.
@

@t006
@
GraphiC/PST was unable to close the file unicode.ttf.
This should not hamper your plot.
@

******************************************************************** TT Errors

@T001
@
GraphiC/PST could not allocate memory to load this
TrueType font. You may continue the plot, but no text will
appear from this font.
@

@T002
@
The font specified is not a valid TrueType font. Please check
the file extension to see if was changed to .ttf by mistake.
@

@T004
@
GraphiC/PST could not locate the file unicode.ttf. This file is
required to use TrueType fonts. Please make sure the path is in
the GPC(286)(WIN) environment variable.
@

@T005
@
The file unicode.ttf has been damaged. Please reinstall GraphiC/PST
from the original distribution disks.
@

******************************************************************** PS Messages

@x008
@
GraphiC/PST encountered an unsupported command in your
PostScript font. It will be ignored.
@

@x003
@
GraphiC/PST was unable to find an AFM for the specified
font. The text will still appear, but kerning will be
disabled for this font.
@

******************************************************************** PS Warnings

@P004
@
GraphiC/PST was unable to allocate memory to store the kerning
information for a PostScript font. Kerning will be disabled
for this font.
@

******************************************************************** PS Errors

@p001
@
The specified font is not a PostScript font. Please check the
extension to be sure it is correct.
@

@p002
@
The specified font is not a valid PostScript font. Please check
the extension to be sure it is correct.
@

@p005
@
GraphiC/PST was unable to locate the file stdencod.pos. Please make
sure its path is in the GPC(286)(WIN) environment variable. The plot
may continue, but the font will not appear.
@

@p006
@
GraphiC/PST was unable to allocate the memory to load the mapping
file for a PostScript font. The plot may continue, but the font will
not appear.
@

@p007
@
GraphiC/PST was unable to allocate memory to store a PostScript
font. The plot may continue, but this font will not appear.
@

@p009
@
GraphiC/PST does not support Multiple Master fonts at this time.
An upgrade is planned, call to check on availablity.
@